D-ILA chip front projector
New products from the projector itself and external video processor. Let's look at the top of the projector, projector, using aluminum material of fashionable symmetrical symmetry-shaped design. New development of contour design, smooth line design distinctive fuselage built 3 tablets Full HD D-ILA chip. Contrast 2500: 1. Using high-pressure mercury lamp bulb 200W (NUP), although the lamp power output than DLA-HD2K (250W NUP) low, but uses a newly developed optical system, luminance reach 600 lumens (DLA-HD2K 500 lumens).
"DLA-HD11K" and "DLA-HD12K" has adopted the standard lens, while the "DLA-HD11KL" and "DLA-HD12KL" the telephoto lens, but both zoom and autofocus feature. Zoom x rate, standard zoom when is 1.4 times (projection ratio of 1.5: 1 ~ 2.1: 1), telephoto zoom when is 1.9 times (projection ratio of 2.1: 1 ~ 3.8: 1). New development of the zoom lens is composed of 9 groups made up of 11 movie lenses containing two aspherical tablets, improves AF performance. And also adopted the design of the lens aperture into rectangular opening in the "dynamic rectangular aperture" structure, depending on the zoom position optimized aperture, from the end of the distal to the wide-angle can achieve the same level of high contrast.
In addition, also adopted the most suitable for each RGB color of new lighting optics system, beyond the HDTV specifications SMPTE color reduction level, it is also significantly reduced due to lower contrast ratio and arising from the proliferation of optical components. In addition adopted the overall design and acoustic symmetry, significantly reducing noise, noise only 27db.
Projector body video input terminals only DVI-D (HDCP), you can support the input signal has a 1080/60p, 1080/50p, 1080/48p. There are also control with RS-232 Terminal, DC12V trigger Terminal, service terminals, etc. 320W power is consumed. The dimension of the projector itself is 169mm 549 * 513 * (width * deep * high), weight 17kg. Comes with the projector using the remote control and external video processor with the remote control.
External image processor has two---AV set line processor and digital video processor
AV set line processor equipped with video input terminals there are 4 groups HDMI, 3 sets of chromatic aberration (RCA x 1, BNC x 1), 2 s-video, 2 group video, 1 set of RGB * 1 (BNC/chromatic aberration common). Audio input terminals have 2 sets of coaxial digital, 2 1 fiber-optic digital, the group set of analog audio. Output terminals have HDMI 1 group, video signals can be output as 1080/60p, 1080/50p. By HDMI-DVI conversion line AV set line processor and projector, forwards as conversion cable. 5m And there are also control with RS-232 Terminal. Power consumption is 30W. Overall dimensions are 434 * 263 * 46mm (width * deep * high), weight is 4.8kg.
Other kinds of external video processor – digital video processor, built with DCDi, 3: 2 conversion processing high definition circuit. Supports 12bit information processing. Input terminals, RGB (BNC) x 1 (also used as the color difference Terminal), DVI-D (supports HDCP) * 1, video (BNC) x 1, s-video x 1. Output terminal has 1 group DVI-D (HDCP), you can support output terminals for 1080/60p, 1080/50p. Overall dimensions and weight are 438 * 303 * 45mm (width * deep * high), 6.3kg. 5m DVI cable included. Monthly production capacity is estimated to be $ 150.
Use the AV set line processor "DLA-HD11K" and "DLA-HD11KL" from late November and go on sale in late December and adopts digital video processor "DLA-HD12K" and "DLA-HD12KL" also from late November and go on sale in late December.
No comments:
Post a Comment