For ABC's friends, to build a home theater is not easy, I will share with you how to set up home theater.
Home Theater layout diagram (click on the picture to enlarge)
1, 5.1 rear surround the best angle is 100-110 degrees.
2, 7.1 side surround the best angle is 90-100 degrees, rear surround is 135-150 degrees.No matter where you set up home theater we encounter is setting the 5.1 or 7.1 system.
Provided by Dolby and 7.1 diagram 5.1, see the preceding three speaker set-up, differences in surround sound above, if the space is sufficient, of course, is to get the best 7.1 surrounded. The current set up home theater there are typically two ways, first in the living room, the second in the dedicated room. Below we will describe how living room and private audio-visual room set up home theater.• Living room theater
Limited to our living environment, the vast majority of my friends would put the living room as a first choice.
The advantage is the living area is the largest, there are plenty of audio-visual space and also to share my family, in line with the habit of people all along. The disadvantage is that there are restrictions on the placing of equipment, the equipment is usually placed in the living room of the long side, prone to left and right sound field asymmetry. So how rational utilization of the living room is critical.Living room theater
1, projection big screen system to make use of the short edge.
Now the new buildings, usually to the living room and dining room, equipment placed on the long side, who stuck to the wall sit, this is the most general approach.
The advantage is set simple, particularly suitable for the use of flat-panel TV as a display Terminal. For a friend who intends to adopt a projector, you may receive the vote margin problem, in addition to sound effects, stuck to the back wall sitting, left and right surround loudspeaker put restrained, and left and right sound field is also prone to bias, the worst part is prone to low frequency waves. Therefore, a friend will take advantage of the short edge to set up a home theater, speakers and projection screen on the short side, sitting in the living room and dining room in the Middle, so that there is enough distance to enjoy the big screen, and there is plenty of space to the side surround and rear surround effect on low-frequency of breathing, is also relatively good. This setting can be the best audio and video effects, but in setting up more trouble, need all their brains. Some friends, a long edge settings flat panel TV, easy to watch TV programs, and then use the short edge set big screen home cinema, kill two birds with one stone. 2. the importance of shading. Whether active luminescence of flat-panel TV or passive optical projection system, shading is required. Although the flat panel television with very high brightness output, but appropriate shading or must, especially when compared to flat-panel TV out the window, the screen appears the reflection of the window, even if the TV and then lit will also be affected. For projection systems, shading is essential to more fully, more shading can play projector's performance. Projector apart from shading, but also the screen surrounding light ceilings, walls and floors can also produce a reflective, these first reflex points to significant interference screen, contrast and color saturation. The solution is in these first reflex points use the dark color of the paint or hanging decorations, such as the floor laying carpet deep color, also is effective. 3. the main speakers and home speakers don't plaster walls. If space permits, please try to put the main speakers and home speaker left the back wall and the side wall display. Because the back wall and the side walls have twice the impact on low-reflection, the most obvious, prone to low turbidity, rigid and hierarchical. 1 2 3 4 5 6 7 8This article navigation:
No comments:
Post a Comment